The two main Parts in an LED Flashlight are : 1- Tail Cap Switch : 2- The LED Pil l (the thing that Houses the LED and Screws into the Flashlight Host) : in order to Determine which one of them is not working You'll need only : a Piece of Wire (20cm) and an 18650 Battery Connect them as Shown in the following Picture : Connect one of the wire terminals to the Negative Side of the Battery and Connect the Other terminal of the wire on the Side of the Pill and then Touch the Positive terminal of the Battery to the Spring of the Pill If the LED turned on Then The Problem is Caused By the Switch, to Fix or Replace the Flashlight Switch Click Here But if the Led didn't turn on then There is a Problem in the Pill, Either there is a Loose wire because of a bad Soldering Joint, or the Led is Burnt. either way, it can be fixed easily! Good Luck! Best Regards Thulfiqar Ali
